XYW-WRBT Bluetooth 5.0 audio receiver with remote control

Bluetooth 5.0 decoder board including remote control

Add a Bluetooth receiver to your speaker or music system to conveniently play music via a Bluetooth connection. 

A micro USB cell phone charger, a 3.7-4.2 V lithium battery or a 3.7-24 V DC power supply unit can be used for the power supply.

The decoder board can be switched on/off using the short "on/off contact" for 2 seconds. With battery power supply, shutdown when not in use is more power-saving and more convenient for changes.

Specifications:

• Product model: XYW-WRBT
• Working voltage: 3.7 to 24 VDC
• Power supply: either micro USB, 3.7-4.2 V lithium battery or 3.7-24 V DC power supply (not included)
• Remote control battery type: CR2025 (not included)
• Bluetooth version 5.0
• Transmission distance < 15 m (depending on the transition device)
• Signal-to-noise ratio: 90 dB or higher
• Distortion: ≤ -70 dB
• Dual channel (stereo)
• Audio interface: 3.5 mm audio interface
• Safety function: reverse polarity protection
• PCB dimensions: approx. 44 x 30.7 x 20 mm

Usage:

1. After power on, the blue indicator light flashes quickly and enters Bluetooth mode.
2. Enter pairing mode in your mobile device after the "prompt tone" is sent. 
3. Wait until "XYW-WRBT" appears in the available connections. 
4. Tap on "XYW-WRBT" to establish a connection with the module. After a successful connection, the "Prompt Tone" indicator lights up and the music can be played. (The indicator flashes slowly when the music is playing)
5. After the Bluetooth connection is disconnected, the power amplifier board automatically prepares for another pairing. (After playing the "prompt tone", it switches to pairing mode and waits for pairing)

Scope of delivery

• 1x XYW-WRBT Bluetooth 5.0 audio receiver with remote control
• Note: Cable / power supply unit / battery (Lithium/CR2025) not included!