This kit can be used for practical training of basic teaching and electronic technology skills. It contains a complete set of components, such as printed circuit board, sketch and a component list (note: the kit is not a finished product, but must be soldered).
Operating principle:
The AC voltage is converted into DC voltage by bridge rectification.
Soldering precautions:
The resistor is not divided into positive and negative poles. The short leg of the capacitor is the negative pole and must be mounted on the white edge of the capacitor position on the circuit board. The short leg of the LED is the negative pole. The 1n4007 color end corresponds to the white ring end on the circuit board.
Overview:
- Operating temperature: -40℃ ~ +85℃
- Input voltage AC 5-12 V
- Output voltage DC 7-17 V
| Component name | Component no | Component parameter | Quantity |
| Aluminum electrolytic capacitors | C1 | 470uF/25V | 1 |
| Aluminum electrolytic capacitors | C2 | 10uF/25V | 1 |
| Terminals | AC/DC | 5.08-2P | 2 |
| Rectifier diode | D1/D2/D3/D4 | 1N4007 | 4 |
| LED | D5 | red-3mm | 1 |
| Resistor | R1 | 1k | 1 |
| Toggle switch | SW1/SW2 | EG1218 | 2 |
| Pin header | 2,54-8P | 1 | |
| PCB board | 1 |
Scope of delivery:
- 1x Soldering exercise rectifier with 1N4007 - AC, DC 5-12V
Further links to "Soldering exercise rectifier with 1N4007 - AC, DC 5-12V"
Accessories
