Kitronik Inventor's Kit for BBC micro:bit (V1, V2)

The Kitronik Inventor's Kit provides a great introduction to programming and hardware interaction with the BBC micro:bit. This Inventor's Kit contains everything you need for 10 experiments, including the use of LEDs, motors, LDRs and capacitors.

To get you started right away, an easy-to-follow tutorial has been included to guide you through everything you need to know about programming the BBC micro:bit. You don't need any programming experience as the tutorial takes you through the process step by step.

The BBC micro:bit has a selection of pins located on the bottom edge of its circuit board.

Notes:

• This kit needs to be assembled.
• No soldering is required and you can create your first circuit in minutes!
• This kit does not include a micro:bit.

Features:

• Carry out the 10 experiments included in the step-by-step learning book provided.
• All parts are included to perform the 10 experiments (see below).
• Break out 21 accessible pins from the BBC micro:bit usingthe Edge Connector Board for the BBC micro:bit.
• Small prototype breadboard included for quick prototyping.

Scope of delivery:

Please note: BBC micro:bit is NOT included.

• 1 x mounting plate.
• 1 x Potentiometer - vertical type (finger adjustment) 100K
  
• 1 x finger setting spindle
  
• 2 x plastic spacers 10 mm
• 1 x adhesive fixer for the battery pack
• 1 x small breadboard prototype
  
• 1 x terminal connection
  
• 4 x pressure switch
  
• 1 x motor
  
• 1 x transistor
  
• 2 x red 5 mm LED
  
• 2 x orange 5 mm LED
  
• 2 x yellow 5 mm LED
  
• 2 x green 5 mm LED
  
• 1 x RGB 5 mm LED
  
• 1 x fan blade
  
• 5 x 2.2 KΩ resistor
  
• 5 x 10KΩ resistor
  
• 5 x 47Ω resistor
  
• 1 x edge connector breakout board for BBC micro:bit
  
• 10 x jumper cable, plug to plug
  
• 10 x jumper cable, plug to socket
  
• 1 x 470 uF electrolytic capacitor
  
• 1 x piezo element buzzer
  
• 4 x M3 machine screw with pan head
  
• Depending on which brochure version was supplied with your Inventors Kit, you will have one of the following two components:
• 1 x miniature LDR. For booklet versions prior to V1.7.
• 1 x phototransistor. For booklet versions after V1.7.