These PCT SPL lever terminals are designed for fast, reproducible wiring when cables not only need to be connected but also clearly distributed. Instead of screws, a spring contact ensures constant contact pressure on the conductor, which supports a stable electrical connection and at the same time significantly speeds up assembly. The lever mechanism is particularly advantageous when making frequent changes to the structure, during maintenance or when neatly retrofitting branches.
A clear difference to many standard terminal blocks is the structured, color-coded division of the channels. Red, yellow and blue mark separate terminal groups, allowing multi-core supply lines to be clearly assigned. This reduces wiring errors and makes it much easier to check when installed.
Typical applications include lights and lighting, fans and 3D printer cabling, control systems, distributions in housings as well as general electronics and maker projects where work needs to be done quickly, cleanly and without soldering.
Technical Data
- Type: Cable connector, splitter, lever terminal
- Connection principle: Lever clamp with spring contact, solder-free and tool-free
- Reusable: yes, clamping points can be removed as often as required
- Stripping length: 9 to 11 mm
- Rigid conductor cross-section: 0.08 to 2.5 mm²
- Conductor cross-section flexible: 0.08 to 4.0 mm²
- Wire gauge AWG: 28 to 12
- Rated current: 32 A
- Rated voltage: 220 V to 450 V
- Surge voltage: 2.5 kV
- Temperature range: minus 40 °C to plus 105 °C
Scope of delivery
- 1x universal cable connector, clamp connector, splitter - type PCT, SPL with lever
