Kitronik micro:bit Inventors Kit - Python Version, German

The Kitronik Inventor's Kit - Python version for the BBC micro:bit is a great way to get started in programming and hardware interaction with the BBC micro:bit. This inventor's kit contains everything you need for 10 experiments. To get you started right away, we've included an easy-to-follow instruction book that guides you through everything you need to know about programming the BBC micro:bit. You don't need any programming experience as the instruction book will guide you every step of the way. This is a German language version of the booklet, which is identical in every other respect to the other language versions.

The instruction booklet provides step-by-step instructions for all 10 experiments. Experiments 1 - 6 are coded with MakeCode blocks and experiments 7 - 10 with the MakeCode Python editor.

The BBC micro:bit has a selection of pins located on the bottom edge of its board. By using our specially designed edge connector board for the BBC micro:bit in conjunction with the breadboard, it is easy to use these pins to connect additional components to the BBC micro:bit.

Note:

• This kit requires assembly.
• This kit does not include a BBC micro:bit (microcontroller).

Features:

• No soldering required - build your first circuit in minutes!
• Perform 10 experiments included in the step-by-step instructions provided.
• As your skills grow, you can move from blocks to Python, all in the MakeCode environment.
• Experiments 1 - 6 are block-oriented
• Experiments 7 - 10 are now completed using Python
• All parts are included to complete the 10 experiments (listed below).
• Small prototyping breadboard included for quick prototyping

Included

• 1 x mounting plate
• 1 x Potentiometer - Vertical type (finger adjustment) 100K
• 1 x Finger adjustment spindle
• 1 x Adhesive fixer for battery pack
• 1 x Small prototype breadboard
• 1 x End connector
• 4 x pressure switch
• 1 x motor.
• 1 x transistor
• 2 x Red 5mm LED
• 2 x orange 5mm LED
• 2 x yellow 5mm LED
• 2 x green 5mm LED
• 1 x RGB 5mm LED
• 1 x fan blade
• 5 x 2KΩ resistor
• 5 x 10KΩ resistor
• 5 x 47Ω resistor
• 1 x edge connector breakout board for BBC micro:bit
• 10 x male to male jumper wires
• 10 x male to female jumper wires
• 1 x 470uF electrolytic capacitor
• 1 x piezo element buzzer
• 2 x flat head M3 machine screw
• 1 x phototransistor

Requires:

• 1 x BBC micro:bit or BBC micro:bit V2
• 1 x Phillips screwdriver
• 1 x terminal block screwdriver
• 1 x micro USB cable