RTC module DS3231 with I2C interface
incl. VAT plus shipping costs
Delivery time: appr. 1-3 days
- Item no: F23106657
- Weight: 0,01 kg
- Packing dimensions: 3.7 cm x 2.1 cm x 0.9 cm (L x W x H)
Overview:
- HW-084A DS3231 I2C Real Time Clock (RTC) IIC module
- High precision clock module Memory module
- Size: L43mm x W22mm x H12mm
- Weight: 5.1 g
- Operating voltage: 3.3-5.5V
- High precision clock chip: DS3231
- Clock accuracy 0-40 ° C, accuracy 2ppm, annual error of approx. 1 minute
- Memory chip AT24C32 (memory capacity 32K)
- With 2 calendar alarm clocks
- Programmable square wave output
- The real-time clock generates seconds, minutes, hours, weeks, dates, months and years and offers a leap year observation valid until 2100
- The chip has its own temperature sensor with an accuracy of ± 3 ° C.
- IIC bus interface, transmission speed 400 kHz (at 5V supply voltage)
- Can cascade other IIC devices, the address can be changed by shorting the solder bridges A0 / A1 / A2
- The standard address for I2C is 0x57 (Eeprom) and 0x68 (RTC)
Pinout:
- SCL → A5
- SDA → A4
- VCC → 5V
- GND → GND
Helpful links:
Scope of delivery:
- 1x RTC module DS3231 with I2C interface
RTC-Modul DS3231
Alles so wie es sein soll.
Gutes Modul mit kleinen Abstrichen
Zunächst einmal ist das Modul eine Quelle um günstig an einen DS3231 heranzukommen. Bei den üblichen Distributoren wird meist das doppelte alleine für den nackten DS3231 aufgerufen.
Für Low Power Anwendungen muss das Board allerdings modifiziert werden.
Die LED ist meiner Meinung total sinnlos und ein EEPROM hat heute jeder Mikrocontroller integriert. Aber es ist halt gratis dabei und wer es nicht braucht, kann es von der Platine löten.
Ob der ausgesprochen preiswerte DS3231 die gleiche Genauigkeit liefert wie die teuren von einem namenhaften Distributer muss er erst beweisen.
+-2ppm sind eine echte Ansage. Mal sehen, wie die Abweichung nach einigen Monaten aussieht!
Alles bestens!
Schnelle Lieferung, beide Module habe funktioniert, besser geht es nicht!
Ein Li-Akku muss separat bestellt werden.
Qualität ist gut, es muß aber ein Akku verwendet werden oder man muß die Diode entfernen.
Ein Hinweis das ein Akku verwendet werden muß und keine Batterie
Zur Stromversorgung kann ein Akku verwendet werden.
Zur Stromversorgung kann ein Akku verwendet werden.
![Funduino UNO R3 microcontroller - Arduino compatible Funduino UNO R3 microcontroller - Arduino compatible](https://funduinoshop.com/media/image/a8/5e/98/Funduino-UNOR3-Mikrocontroller-Arduino-kompatibel_200x200.png, https://funduinoshop.com/media/image/10/94/5e/Funduino-UNOR3-Mikrocontroller-Arduino-kompatibel_200x200@2x.png 2x)
![Power supply unit for microcontroller - 9V, 1A Power supply unit for microcontroller - 9V, 1A](https://funduinoshop.com/media/image/b5/72/d9/Netzteil-fuer-Mikrocontroller-9V-1A-side_200x200.png, https://funduinoshop.com/media/image/5c/3d/43/Netzteil-fuer-Mikrocontroller-9V-1A-side_200x200@2x.png 2x)
![GY-BME280 - Air pressure, humidity, temperature sensor - I2C/SPI GY-BME280 - Air pressure, humidity, temperature sensor - I2C/SPI](https://funduinoshop.com/media/image/68/68/44/GY-BME280-Luftdruck-Feuchtigkeits-Temperatursensor-I2C-SPI-01_200x200.png, https://funduinoshop.com/media/image/7d/d8/a2/GY-BME280-Luftdruck-Feuchtigkeits-Temperatursensor-I2C-SPI-01_200x200@2x.png 2x)
![Push button with colored knob - 12*12*6mm / 12*12*9mm Push button with colored knob - 12*12*6mm / 12*12*9mm](https://funduinoshop.com/media/image/32/af/79/Taster-mit-farbigem-Knopf-12-12-6_200x200.png, https://funduinoshop.com/media/image/be/7f/f1/Taster-mit-farbigem-Knopf-12-12-6_200x200@2x.png 2x)
![Funduino NANO R3 - with original FTDI chipset Funduino NANO R3 - with original FTDI chipset](https://funduinoshop.com/media/image/65/84/8d/Funduino-NANO-R3-mit-original-FTDI-Chipsatz_200x200.png, https://funduinoshop.com/media/image/25/cc/eb/Funduino-NANO-R3-mit-original-FTDI-Chipsatz_200x200@2x.png 2x)
![L298N H-bridge for two motors / motor drivers L298N H-bridge for two motors / motor drivers](https://funduinoshop.com/media/image/3c/9a/a2/L298N-H-Bruecke-fuer-zwei-Motoren-Motortreiber_200x200.png, https://funduinoshop.com/media/image/ba/50/d1/L298N-H-Bruecke-fuer-zwei-Motoren-Motortreiber_200x200@2x.png 2x)
![Mounting plate with breadboard for Arduino UNO Mounting plate with breadboard for Arduino UNO](https://funduinoshop.com/media/image/6f/fa/ce/Montageplatte-mit-Breadboard-fuer-Arduino-UNO-side_200x200.png, https://funduinoshop.com/media/image/45/66/4e/Montageplatte-mit-Breadboard-fuer-Arduino-UNO-side_200x200@2x.png 2x)
![Funduino NANO R3 - with original FTDI chipset Funduino NANO R3 - with original FTDI chipset](https://funduinoshop.com/media/image/65/84/8d/Funduino-NANO-R3-mit-original-FTDI-Chipsatz_200x200.png, https://funduinoshop.com/media/image/25/cc/eb/Funduino-NANO-R3-mit-original-FTDI-Chipsatz_200x200@2x.png 2x)
![Funduino UNO R3 microcontroller - Arduino compatible Funduino UNO R3 microcontroller - Arduino compatible](https://funduinoshop.com/media/image/a8/5e/98/Funduino-UNOR3-Mikrocontroller-Arduino-kompatibel_200x200.png, https://funduinoshop.com/media/image/10/94/5e/Funduino-UNOR3-Mikrocontroller-Arduino-kompatibel_200x200@2x.png 2x)
![L298N H-bridge for two motors / motor drivers L298N H-bridge for two motors / motor drivers](https://funduinoshop.com/media/image/3c/9a/a2/L298N-H-Bruecke-fuer-zwei-Motoren-Motortreiber_200x200.png, https://funduinoshop.com/media/image/ba/50/d1/L298N-H-Bruecke-fuer-zwei-Motoren-Motortreiber_200x200@2x.png 2x)
![15 in 1 - Sensor Kit, Sensor Starter Set for microcontrollers 15 in 1 - Sensor Kit, Sensor Starter Set for microcontrollers](https://funduinoshop.com/media/image/58/bd/09/31081_2_OL_200x200.jpg, https://funduinoshop.com/media/image/9c/75/28/31081_2_OL_200x200@2x.jpg 2x)
![3* 830P breadboard, 40 pcs. M/M cable, 40 pcs. M/F cable, 40 pcs. F/F cables 3* 830P breadboard, 40 pcs. M/M cable, 40 pcs. M/F cable, 40 pcs. F/F cables](https://funduinoshop.com/media/image/85/09/49/23KswnG4MhndeV_200x200.png, https://funduinoshop.com/media/image/ae/59/63/23KswnG4MhndeV_200x200@2x.png 2x)
![830P breadboard, 65 M/M cable and MB102 power supply module 830P breadboard, 65 M/M cable and MB102 power supply module](https://funduinoshop.com/media/image/84/a8/39/Bundle-1-v2_200x200.png)
![GY-61, ADXL335 - 3-axis accelerometer, not soldered GY-61, ADXL335 - 3-axis accelerometer, not soldered](https://funduinoshop.com/media/image/4f/a4/63/GY-61-WDXL-335-3-Achsen-Beschleunigungssensor-nicht-geloetet_200x200.png, https://funduinoshop.com/media/image/e8/41/79/GY-61-WDXL-335-3-Achsen-Beschleunigungssensor-nicht-geloetet_200x200@2x.png 2x)