XH-M600 Lithium Battery Charge Controller 30A, 6V - 60V

Adjustable battery charge controller board for DC6-60V lead-acid batteries and lithium-ion batteries, also compatible with solar panel and small wind turbines. The charging circuit is automatically disconnected when the setting value is reached to prevent battery overcharging and prolong battery life. 

Overview:

• Integrated push button to set the voltages for charge start and charge stop
• 3-digit red LED display for setting parameters
• Integrated 30A 1-channel relay for automatic on/off control
• Overcharge protection
• Input voltage: DC 6 - 60 V
• Charging current: max. 30A
• Display and control accuracy: 0.1 V
• Voltage tolerance: +/-0.1 V
• Application: 6V - 60 V batteries
• Dimensions: 84,5 x 60 x 23,7 mm

Instructions:

1. Connect to battery (if not, no display will be shown)
2. Press the "+" button to display the upper limit voltage. Press and hold to make the display flash, then set the upper limit voltage.
3. Press the "-" key to display the lower limit voltage. Press and hold to make the display flash, then set the lower limit voltage.
4. Connecting to the charger
5. Press the "SET" key to turn off the display and save power

Scope of delivery:

• 1x XH-M600 lithium battery charge controller 30A, 6-60V