ANET ET5 Pro - Adapter Board / Mounting Plate

Product Overview

• Adapter board for wiring all modules on the hot end of a 3D printer
• Consolidates connections for the fan, thermistor, limit switch, motors, and leveling sensor
• Compatible with the ANET ET5 Pro and identical ET4/ET5 models
• Connects print head modules to the mainboard via a ribbon cable
• Nine labeled connectors and solder pads for the individual components
• With a separate connection for the Z-axis leveling sensor (ABL sensor version)

Product Description

This adapter board is mounted on the print head of an ANET 3D printer and consolidates all components installed there into a single central interface. Instead of routing each module individually to the mainboard, the thermistor, fan, sensors, and motors are first connected here. A single ribbon cable then transmits all signals to the mainboard.

The board features nine labeled slots corresponding to the individual components of the hotend. This is where the connectors for the extruder motor, the X-axis motors, the heating element, the hotend fan, a filament sensor, the various limit switches, and the automatic bed leveling sensor (ABL sensor) are plugged in. In addition, there are connectors marked “+” and “–” for a Z-axis sensor and the headlight, only some of which need to be used depending on the printer’s configuration.

This version is specifically designed for the ANET ET5 Pro as well as the structurally identical ET4 and ET5 models and is mounted on the back of the left X-carriage section. Consolidating all connections at a central point not only simplifies print head assembly but also significantly reduces cabling inside the printer enclosure.

Safety Note

Before connecting, ensure that all connectors are properly connected to the corresponding hotend modules and that the polarity is correct. Work on the printer assembly and wiring should only be performed when the printer is turned off and de-energized. If you are unsure about the correct wiring, consult a qualified electrician before commissioning.

Package Contents

• 1* ANET ET5 Pro - Adapter Board / Connection Plate