DC6V-60V XH-M604 - Control module / charge controller for lithium battery

This module can be used to regulate the charge/discharge of lithium batteries to prevent the battery from over-discharging and to extend the service life of the battery or save energy.

Overview:

• Applicable for: 6-60 V, max. 80 V battery
• Display accuracy: 0.1 V
• Control accuracy: 0.1 V
• Control current: up to 30 A
• Output type: Direct output
• Voltage tolerance: + 0.1 V
• Size: 81 x 54 x 18 mm

Application:

1. Connect the battery to be charged to the charge controller, the start value is displayed automatically.

2. Press and hold the bottom left button. When the display flashes, the target value for the charging voltage can be set (the left button decreases the value, the right button increases the value).

3. After setting the target value, wait briefly until the display stops flashing.

4. Connect to the power supply unit and start the charging process with the left button. If necessary, it can be stopped before the target value is reached by pressing the right button.

Scope of delivery:

• 1x DC6V-60V XH-M604 - Control module / charge controller for lithium battery