JGA25-370 Encoder gear motor kit 12V 12RPM with wheel

Overview:

• Motor: JGA25-370
• Voltage: 12 V DC
• Idle speed (rpm): 12 RPM, speed: 9 RPM
• Idle current: 0.07 A, current: 0.3 A
• Torque: 9.7 kg/cm (with voltage supply)
• Shaft diameter: 4 mm (3.45 mm)
• Tire diameter: approx. 67 mm
• Motor weight: 91 g
• Size L (see drawing): 27 mm

Encoder connection

• Red wire - positive power supply to the motor (+). If the polarity (plus/minus) is reversed, the direction of rotation of the motor changes.
• White wire - negative power supply to the motor (-). The direction of rotation also changes here if the polarity is reversed.
• Yellow wire - signal feedback A (11 pulses per revolution)
• Green wire - signal feedback B (11 pulses per revolution)
• Blue wire - positive power supply of the encoder (+), voltage between 3.3 and 5 V. The correct polarity must be observed here.
• Black wire - negative power supply of the encoder (-)
• Output signal: square wave (standard)
• Power supply for the encoder: 3.3 V-5V
• Operating temperature range: - 40 ℃ - 120 ℃

Scope of delivery:

• 1x JGA25-370 encoder geared motor kit 12V 12RPM, consisting of
• 1x encoder motor
• 1 x wheel
• 1 x bracket
• 1x coupling
• Installation screws