Robotics learning module - battery test - for Dobot and Universal Robots

The "Battery Test" learning module is used to simulate individual robotic processes from industry. The individual parts of the learning module are moved and used with the aid of gripping tools such as suction pads from the DOBOT E6, CR3, Dobot CR5 or Universal Robots UR3 and Universal Robots UR5. All modules lock onto and against each other. There are two trays for good and bad batteries. There are also two trays in which two batteries can be stored and transported. These trays can be lifted from above using a suction gripper, but can also be picked up from the side using a regular gripper.

The aim is to fill the trays and move them to the test location. There, the trays can be stored on top of each other. As an example, the batteries are positioned in a test device for a test.

In the future, it will be possible to test the batteries there and evaluate them using an optocoupler (send a digital signal to the robot or to the PLC - contact us for individual solutions)

All modules are compatible with the enclosed perforated plate and also with other learning modules from Funduino GmbH.

The learning module consists of the following individual parts:

- 2x movable tray (battery holder)

- 2x battery tray (movable with gripping tool)

- Pallet as tray / transport tray - movable by suction pad through smooth pad in the middle of the pallet.

- 2x perforated aluminum plate

Technical data:

Total height:

Length and width:

Individual components:

Total weight:

Weight of individual components: