Otto robot - DIY experiment kit, Arduino controlled
incl. VAT plus shipping costs
Available immediately, delivery time 2 to 4 working days
- Item no: P-04
- Weight: 0,00 kg
Otto robot - Creative work with Arduino for Arduino courses, schools and tinkerers
With this prefabricated Arduino project, Arduino programming can be implemented in a playful way. The robot is driven by only four servo motors (SG90). It can walk, dance and learn whole choreographies with them - almost, like a real human!
On the front side there is an ultrasonic sensor HC-SR04, with which the robot detects objects. This gives Otto the ability to avoid objects and avoid collisions. In addition, the Otto robot has a small speaker with which it can make itself known in a very cute way.
The combination of all these practical features makes the Otto robot a real all-round hero - ideal, therefore, for the educational sector!
Note on the Funduino Otto robot
With the "OttoDIY" housings, a switch is used to turn the power supply on and off. With the Otto-Robot from Funduino, the power supply is plugged into the shield outside the robot. This allows our Otto robot to be put into operation completely without soldering tools. Our Otto robot is fully compatible with the english instructions and codes from www.ottodiy.com
Scope of delivery (for variation "without case" and "with case")
- 1* Funduino NANO R3 with CH340 chip (Arduino compatible) incl. USB cable
- 4* servo SG90
- 1* Expansion Shield for Arduino UNO/NANO (I/O Shield - Protoshield)
- 1* HC-SR04 Ultrasonic sensor
- 1* loudspeaker
- 10* plug-in cable
- 1* 9V battery cable (no battery included)
- 1* DC adapter with screw terminals (with this adapter any power source can be used; the cable ends are attached to the adapter and plugged into the power supply socket of the NANO-Shield)
- 1* On / Off switch (not needed with the "Funduino-Otto" case, but included for completeness)
- Screws and servo accessories
Scope of delivery (only for variation "with housing")
- 1* Housing upper part with cut-outs for the HC-SR04 ultrasonic sensor
- 1* Housing lower part
- 2* legs
- 1* foot (left)
- 1* foot (right)
All components are made by us in 3D printing process.
Der Roboter macht Spaß, Zusammenbau und Programmierung lehrreich, kompetente Ansprechpartner im shop
Der Otto ist toll, die Anleitungen sind ausbaufähig...
Der Roboter ist wirklich toll, alles dabei was man Hardwaremäßig braucht.
Leichte Nacharbeiten am Gehäuse mit der Feile sind nötig aber problemlos machbar wenn man Werkzeug hat.
Leider sind die Aufbauanleitungen nicht 100% passend und man muss sich trotz der Links auf der Bestellseite durch das Internet wühlen bis man halbwegs passende Anleitungen für Hardware und Software hat.
Sehr schönes Set, super schnelle Lieferung, mein 10jähriger Sohn ist begeistert
Gern wieder















