NRF24L01 + / CC1100/CC2500/A7105 module / approx.100m

NRF24L01 + / CC1100/CC2500/A7105 module

We currently have no further information or instructions for this module . If this module is required, corresponding data must be obtained from the network, for example.

2Mbit / s 1Mbit / s 250Kbit / s three optional transmission rate
MultiCeiver hardware the same time six receivers
Link layer chip software design
2Mbit / s makes high-quality VoIP become possible
2Mbit / s 1Mbit / s 250Kbit / s three optional transmission rate
Very few external components offers the possibility for low-cost
+ / - 60 ppm crystal
Only requires an external antenna matching inductance
No multi-layer PCB
The 5V tolerance level input
Eliminates the need for external level converter
Improved ShockBurst and serial interface makes it easy to connect with a variety of low-cost MCU
No need MCU with SPI interface
20 pin 4x4mm QFN leadless package very few external components
2Mbit / s rate when receiving the peak current of 12.5mA
2Mbit / s rate @ 0dBm output peak current of 11mA
A rate of 2Mbit / s is just a very small average current
Power consumption in power-down mode 400nA
32uA power consumption in standby mode
The 130us fast switch and wake-up time
With on-chip voltage regulator oltage regulators
In the 1.9 to 3.6V low voltage operation
The maximum possible to reduce noise