Image similar

Preview: GrovePi+ - Raspberry Pi expansion board

GrovePi+ - Raspberry Pi expansion board

€42.00 *

Content: 1 Piece

incl. VAT plus shipping costs

Delivery time: appr. 1-3 days

Item no: F23109313
Weight: 0,01 kg
Packing dimensions: 8 cm x 5 cm x 2 cm (L x W x H)

Secure and fast payment with

GrovePi+ - Raspberry Pi expansion board GrovePi+ is an add-on board with 15 4-pin interfaces... more

Close menu

GrovePi+ - Raspberry Pi expansion board

GrovePi+ is an add-on board with 15 4-pin interfaces from Grove that brings Grove sensors to the Raspberry Pi. It is the latest version compatible with the Raspberry Pi model B/B+/A+/2/3/4.

This board enables the easy-to-use and modular Grove system for the Raspberry Pi, eliminating the need for soldering or breadboards: Connect your Grove sensors and start programming straight away. Grove is an easy-to-use collection of hundreds of low-cost, plug-and-play modules that sense and control the physical world. By connecting Grove sensors to Raspberry Pi, your Pi is brought into the physical world. With hundreds of sensors from the Grove families, the possibilities for interaction are endless.

There are three mounting holes that fit perfectly with all versions of the Raspberry Pi.

Note: Raspberry Pi board is not included.

Features

Compatible with many development boards: Including Raspberry Pi model B/B+/A+/2/3/4
Faster SPI and UART connections with higher reliability
Easier mounting of camera cables and LCD cables
Simplified firmware update procedures

Grove extension for Raspberry Pi: Grove Base Hat vs. GrovePi+

Parameters	Grove Base Hat for Raspberry Pi	GrovePi+
Operating voltage	3,3 V	5V
MCU	STM32F030F4P6	ATMEGA328P
Grove ports	6 Digital (3.3 V) 4 Analog (3.3 V) 3 I2C (3.3 V) 1 PWM (3.3 V) 1 RPISER (UART) Connection to Raspberry Pi (3.3 V) 1 SWD	7 Digital (5 V) 3 Analog (5 V) 3 I2C (5 V) 1 SERIAL: Connection to ATMEGA328P D0/1 (5 V) 1 RPISER: Connection to Raspberry Pi (3.3 V) 1 ISP
Grove-Digital	Direct connection to the Raspberry Pi	Connect to the digital pins of the ATMEGA328P and transfer it to the I2C signal and then to the Raspberry Pi via the level converter
Grove analog	Connect to STM32F030F4P6 (12-bit ADC) and then transfer it to the I2C signal and pass it directly to Raspberry Pi	Connect to the analog pins of the ATMEGA328P (10-bit ADC) and then transfer it to the I2C signal and then to the Raspberry Pi via the level converter
Grove-I2C	Direct connection to the Raspberry Pi	Establish a connection to the Raspberry Pi via the level converter
Grove-PWM	Direct connection to the Raspberry Pi	N / A
RPISER	Direct connection to the Raspberry Pi	Direct connection to the Raspberry Pi
SERIES	N / A	Connect to the digital pins D0/D1 of the ATMEGA328P and transfer to the I2C signal, then via the level converter to the Raspberry Pi
SWD	Burn the firmware to STM32F030F4P6	N / A
ISP	N / A	Burn firmware to ATMEGA328P
Raspberry Pi connector pins	40	26

Specifications

Dimensions: 88mm x 58mm x 23mm
Weight: 51g
Grove header Vcc output voltage: 5Vdc
Digital ports: 7
Analog ports: 3
I2C ports: 3
Serial interface for connection to GrovePi: 1
Serial interface for connection to Raspberry Pi: 1

Parts list

1x GrovePi+ - Raspberry Pi expansion board

Raspberry Pi and Grove cable not included!

Further links to "GrovePi+ - Raspberry Pi expansion board"