Compressed Air Hose (PE), Sold by the Meter, Yellow

Product Overview

• Polyethylene (PE) by the meter, dyed yellow
• Operating pressure up to 20 bar
• Inner diameter 6 mm, outer diameter 10 mm
• Roll length: 100 m
• Smooth surface, flexible even at low temperatures
• Rapid pressure relief in the event of a pressure drop

Product Description

The PE compressed air hose for pneumatic applications is supplied in roll form and can be cut to the required length. The yellow plastic withstands operating pressures up to 20 bar and retains its flexibility even as temperatures drop, making it suitable for use in a variety of environments.

The hose, with an inner diameter of 6 mm and an outer diameter of 10 mm, threads through tight workspaces and machine frames without major detours. Its smooth surface reduces pressure losses during flow and simplifies installation. The PE material quickly relieves pressure when there is a drop in pressure, which facilitates safe operation.

The hose is suitable for pneumatic tools, fastening systems, and the control of automated manufacturing in workshops, assembly areas, and light industrial applications. In mechanical engineering, long piping runs are often implemented using roll stock to save time during setup. Connecting multiple consumers to a compressed air station is also achieved using custom-cut lengths.

Connection fittings compatible with 6-mm hoses are required for use. The compressed air supply must be capable of delivering pressures of at least 20 bar. The hose length depends on the spatial conditions, although long lines slow down pressure build-up.

Safety Note

The hose must not be connected to the household electrical circuit and is intended exclusively for compressed air applications. Before commissioning, ensure that all connections are tight and that the operating pressure does not exceed 20 bar. If the hose is damaged, immediately shut down the system to prevent accidents caused by escaping compressed air.