Time relay 5V 12V 24V - Switch-on and switch-off delay

Overview:

• Adjustable time relay with two potentiometers for controlling the switch-on and switch-off delay
• Relay has two switching directions: NO(Normally Open, looking sideways at the screw terminals on the far left) and NC(Normally Closed,  looking sideways at the screw terminals on the far right)
• The time interval is adjustable via potentiometer
• Supply voltage dependent on variation
• With LEDs for status display

Technical data:

• Module-JK11 with a maximum load of 10A/250VAC or 10A/30VDC
• Supply voltage: 5, 12 or 24 V DC depending on variant
• Timing error: <2%

Notes on the mode:

• In single mode, the relay is switched on once when activated and remains activated for a certain time
• In loop mode, the relay is switched on when activated and remains activated for a certain time, then deactivated for another time, and this sequence is repeated
• Modes (jumper outside: single execution or jumper inside: repeating) can be changed by jumper (no. 1 in the picture)
• The jumper setting (no. 2 in the picture) influences the time interval (jumper outside corresponds to the regular time setting, jumper inside corresponds to the time setting divided by a factor of 10)
• Power supply (no. 3 in the picture)
• Activation by short-circuiting the two contacts (no. 4 in the picture)
• Rotary potentiometer for setting the switch-on time T1 (no. 5 in the picture)
• Rotary potentiometer for setting the switch-off time T2 (no. 6 in the picture)
• LEDs for status display (no. 7 in the picture)

Scope of delivery:

• 1* Time relay 5V 12V 24V - switch-on and switch-off delay