Grove - Uart Wifi v2 (ESP8285)
incl. VAT plus shipping costs
Sold out
Delivery time 1-3 Working days
- Item no: F23106161
- Packing dimensions: 4 cm x 2 cm (L x W)
Grove - UART WiFi V2.0 (ESP8285)
Grove - UART WiFi V2.0 (ESP8285) is a serial transceiver module with the ubiquitous IoT SoC ESP8285. With an integrated TCP/IP protocol stack, this module allows your microcontroller to interact with WiFi networks with just a few lines of code. The SoC has integrated WEP, WPA/WPA2, TKIP, AES and WAPI engines, can act as an access point with DHCP, can join existing WiFi networks and has configurable MAC and IP addresses.
It is the upgrade version of Grove - UART WiFi. The ESP8266 has been changed to the ESP8285 and some other adjustments have been made to make it more stable and lighter.
ESP8285 can run either as a standalone application or as a slave to a host MCU. When ESP8285 hosts the application, it starts immediately from flash. The integrated high-speed cache helps to increase system performance and optimize system memory. In addition, ESP8285 can be applied to any microcontroller design as a Wi-Fi adapter via SPI/SDIO or I2C/UART interfaces.
Features:
- Highly integrated Wi-Fi SoC: high performance ESP8285 WLAN chip, supports 802.11 b/g/n, 2.4-2.4835 GHz up to 72.2 Mbps and Ap&Station mode
- Ultra-low power technology: Five power states reduce non-essential functions and lower energy consumption, supporting DEEP_SLEEP mode
- Good Wi-Fi performance and fast response: Can wake up quickly and transmit data packets within 2 ms
- Integrated high-speed cache: Helps improve system performance and optimize system memory
- Beginner-friendly: Plug-and-play Grove connection with detailed wiki
Technical details:
- Dimensions: 40mm x 20mm x 7mm
- Weight: 8g
- Input voltage: 3V / 5V
- Baud rate: 115200
- Chip: ESP8285 ESP-07 SoC
- AT firmware: esp_iot_sdk_v1.1.0
- Interface: SDIO 1.1/2.0, SPI, UART
- Five power states: OFF, DEEP_SLEEP, SLEEP, WAKEUP and ON
- Consumption: Standby power consumption of < 1.0 mW (DTIM=3)
- Leakage current: switch-off leakage current of <10uA
- Output: +19.5 dBm output power in 802.11b mode
- Security protocol: WPA/WPA2 PSK and WPS
Application ideas:
- Home automation
- Sensor networks
- Mesh networks
- Portable electronics
- Baby monitor
- Network camera
- Industrial wireless control
- WiFi beacons
- Smart power plug
- Location-based applications
Parts list:
- 1x Grove - UART WiFi V2 (ESP8285)
- 1x Grove cable