Discover the Funduino developer board (soldering exercise)
In cooperation with Hackerspace Bremen e.V., we have developed the Funduino developer board in a soldering kit to give budding electronics experts an understandable and entertaining introduction to the world of microelectronics.
The soldering kit contains a variety of LEDs, sensors and actuators and an external connection for motors. The knowledge gained provides an excellent basis for further Arduino projects.
The kit is supplied unsoldered. This promotes the learners' soldering skills and gives them the opportunity to adapt the soldering kit to their individual requirements. Of course, we provide detailed assembly instructions.
Attention proud owners of a 3D printer: As an additional accessory, we have designed a frame for the soldering kit to print out yourself, this is not included!
Helpful links:
Scope of delivery:
- 1x Arduino NANO compatible microcontroller (CH340 chip)
- 1x PCB
- 1x Display OLED 0.96"
- 1x DHT11 temperature and humidity sensor
- 1x loudspeaker
- 1x WS2812B LED module with 8 pixels (Neopixel)
- 1x TL1838 infrared receiver
- 1x LDR photo resistor (light sensor)
- 1x ADXL335
- 1x potentiometer
- 1x push-button
- 1x RGB LED
- 1x red LED
- 1x LED yellow
- 1x LED green
- 5x 220Ohm resistor (alternatively 100Ohm or 150 Ohm)
- 1x resistor 820Ohm
- 1x resistor 1.2kOhm
- 1x resistor 47kOhm (alternatively 10kOhm)
- 2x resistor 4.7kOhm
- 2x100nF capacitor
- 1x220uF 25V capacitor
- 2x pin header 1x3
- 1x pin header 1x4
- 1x pin header 90°
- 4x mounting screws
- 2x pinheader (socket)
