This tool is used to remove excess tin that is left behind during soldering. It can also be used to remove molten solder from areas that are to be desoldered.
Overview:
- Air suction and pulse suction button
- Material: Plastic
- Model: TGK-2013
- Tip diameter: 3.2 mm
- Dimensions: 19.8x2.75x3.22cm
Instructions:
- Press the spring to the stop, bring the Teflon tip close to the area to be desoldered, heat the solder to be removed with the soldering iron and allow it to melt.
- Release the spring with the release button, the extractor absorbs the solder.
- To dispose of the removed solder, press the spring again and release it with the button.
- Repeat these steps as often as necessary.
Scope of delivery:
- 1x Desoldering pump solder suction pump TKG-2013
Further links to "Desoldering pump Soldering suction pump TKG-2013"
Zubehör
