DYNAMIXEL AX-12A Bulk 6 pieces
- Item no: F25110850
- Weight: 0,33 kg
- Packing dimensions: 22.5 cm x 20.5 cm x 6 cm (L x W x H)
General
ROBOTIS is a well-known manufacturer of robotics development platforms and components. This company also manufactures industrial quality servo motors and interfaces under the name DYNAMIXEL. The AX-12A servo motors are equipped with an integrated reduction ratio of 254:1, a controller with feedback and driver. In combination with the half duplex interface, the servos can be controlled very precisely and also provide the control unit with feedback on the current position at all times. The maximum resolution (position accuracy) is 1024 divisions. As each servo can be assigned a unique ID, the servos can be connected in series (one behind the other, as shown below) and the wiring is reduced to a minimum.
Technical data
Below are some technical specifications for the DYNAMIXEL AX-12A servo. The complete data sheet with further information can be viewed HERE.
- Weight: 53.5g (per servo)
- Dimensions: 32 x 50 x 40mm
- Resolution: 0.29°
- Reduction ratio: 254:1
- Holding torque: 1.52N.m (at 12V / 1.5A)
- Actuating speed: 59 rpm (without load)
- Operating angle: 0 - 300°
- Operating temperature: -5° + 70°C
- Voltage: 9 - 12V (recommended voltage: 11.1V / 3S Lipo)
- Data transmission: Half Duplex / 8Bit, 1 Stop, No Parity / 7343bps ~ 1 Mbps
- ID assignment up to 254
Compatible control units
Due to the great popularity, various control units with different periphery and UC's are available. All of the following control units are Arduino and ROS compatible, creating a combination of easy handling paired with extensive software packages.
Scope of delivery
- 6 x DYNAMIXEL AX-12A servo motors
