Robotics learning module - car production for Dobot and Universal Robots
- Item no: F23110536
- Weight: 0,20 kg
- Packing dimensions: 8 cm x 8 cm x 11 cm (L x W x H)
The "Car Production" learning module is used to simulate individual manufacturing processes from industry. The individual parts of the model vehicle are assembled with the help of gripping tools such as suction pads from the DOBOT E6, CR3, Dobot CR5 or Universal Robots UR3 and Universal Robots UR5. All modules lock onto and against each other. The two doors are held in place on the body by magnets after insertion. The hood and trunk lid lock into place by simply inserting and removing them.
The individual parts are stored in trays that are compatible with the enclosed perforated plate and with other learning modules from Funduino GmbH.
The module consists of the following individual parts:
- Lower body (chassis with seats)
- Top body
- Left door
- Right door
- Hood
- Trunk lid
Depending on the robot tool, different work steps can be carried out. Even with a simple suction gripper, the two doors, the hood and the trunk lid can be assembled by robot. A gripper tool is required to transport the two body parts (top and bottom).
Technical data:
Overall height:
Length and width:
Individual components: 6
Total weight:
Weight of individual components: