The xTool fire protection set is an innovative safety system for desktop laser cutters that offers comprehensive protection through automatic flame detection, alarming, power shutdown and fire extinguishing with CO₂ gas.

With the xTool fire protection set, you significantly increase the safety of your laser work and protect both your equipment and your surroundings from potential fire hazards.

Key features:

• Automatic flame detection: Equipped with five fire detection sensors and integrated algorithms for light, temperature and position, the system reliably detects potential fire hazards in the enclosed laser room.

• Automatic alarm: If a fire is detected, an acoustic alarm is triggered immediately, warning the user with continuous beeps.

• Automatic power cut-off: To prevent the fire from spreading and to protect the laser machine, the system's intelligent switch automatically turns off the laser a few seconds after the alarm.

• Automatic fire extinguishing: After the alarm is triggered, CO₂ gas is released into the enclosed laser room to extinguish the fire quickly and without leaving any residue.

Compatibility:

The fire protection set is compatible with the xTool D1 series, M1, P2 and Laserbox or S1, M1 Ultra, F1 Ultra as well as with all 455 nm blue diode or CO₂ laser machines in an enclosed space of up to 0.13 m³.

Scope of delivery:

• Control box
• Sensor hub
• Five fire detection sensors
• Four CO₂ gas cylinders
• Intelligent switch
• Air hose
• Hose clamp
• Cable tie
• 3M adhesive tape
• Mains cable and adapter
• Cable clamp