Adapter block for mounting ball screws on stepper motors with bearings.
Ball screws are ideal for use in all areas where extremely precise linear movements are required. Compared to conventional lead screws such as metric or trapezoidal lead screws, the ball screw principle enables significantly higher precision. The continuous orbiting of balls in the lead screw nut minimizes almost any play between the lead screw and the lead screw nut. In addition, the reduced rolling resistance leads to a significant reduction in wear and the required drive power.
Overview:
- Material: Aluminum
- Dimensions: 60mm x 60mm x 95mm
- Spindle diameter: 16mm (HM12-60 C5, HM12-60 C7), 10/12mm (HM12-57 C5)
- Compatibility:
- HM12-57 C5: For NEMA 23 with SFU1604 / SFU1605 / SFU1610 ball screw
- HM12-57 C7: For NEMA 23 with SFU1604 / SFU1605 / SFU1610 ball screw
- HM12-60 C5: For NEMA 24 with SFU1604 / SFU1605 / SFU1610 ball screw
- HM12-60 C7: For NEMA 24 with SFU1604 / SFU1605 / SFU1610 ball screw
- Ball screw support through integrated ball bearing
- Various adapters included
Note:
C7 is a standard ball bearing (6001)
C5 is an angular contact ball bearing (7001)
57 is for NEMA 23 motor
60 is for NEMA 24 motor
80 is for NEMA 32 motor
86 is for NEMA 34 motor
HM12 is for ball screw SFU1604/1605/1610
HM15 is for ball screw SFU2004/2005/2010
Scope of delivery:
- 1x stepper motor bracket - variant depending on selection
