LOKLiK Crafter cutting blade 45° - pack of 2

The LOKLiK cutting blade 45° - 2-pack is a replacement blade set for your LOKLiK Crafter. With a 45° cutting angle, these knives can be used for light to medium weight materials such as paper, vinyl, stickers, reflective film, etc. Whether you are cutting intricate details or working with different materials, these knives provide the precision you need.

Please note:

• If you want to cut thicker materials, we recommend our LOKLiK cutting blade 60° 2-pack.
• These blades are not compatible with the LOKLiK iCraft™ slicer.

With this blade you can cut the following:

• Heat transfer vinyl
• Adhesive vinyl
• Cardboard
• etc.

How to install a new cutting blade in your LOKLiK Crafter:

1. Switch off the machine: Make sure that the cutting machine is completely switched off before you start changing the blade.
2. Remove the old blade: Carefully unscrew the blade holder and remove the old blade.
3. Insert new cutting blade: Remove a new 45° blade from the packaging and place it in the blade holder with the sharp side facing down.
4. Secure the blade holder: Screw the blade holder back on to secure the new blade.
5. Test the blade: Turn the machine on and make a test cut on a scrap piece to ensure the blade is installed correctly and works as expected.

Care and maintenance

Store unused blades in a dry and safe place to prevent rust and damage. Regular cleaning of the cutting blade and holder can extend the life of the blade.