Funduino print bed coating "Rough", print bed foil, comparable with BuildTak, 310mm x 310mm
|to 2||€10.87 *|
|from 3||€9.78 *|
|from 5||€9.24 *|
|from 10||€8.70 *|
|from 25||€8.15 *|
incl. VAT plus shipping costs
Available immediately, delivery time 2 to 4 working days
- Item no: R6-E-9-1
- Weight: 0,05 kg
- Packing dimensions: 31 cm x 31 cm x 0.1 cm (L x B x H)
Stable print bed film that is glued to the print bed of FDM/FFM 3D printers.
It provides a rough surface and replaces the conventional print bed coating such as BlueTape, BuildTak or Kapton tape.
The film is very durable and allows for clean and easy removal of the component.
Due to the special surface, the component adheres perfectly and warpage, or warping, is minimized.
- Works especially with PLA, ABS, Wood, PET, Flexible Filament etc.
- No pre-treatment necessary, the film is glued directly to the print bed, or to the glass plate.
- Easy installation
- No bubbles on the print bed, because the film is very stiff and thick (0,8mm incl. transfer film)
- Very durable