iCraft Fine-Point Blade Set

The iCraft fine-point blade set contains a blade and a blade holder. With a cutting angle of 45°, this blade can be used for light to medium weight materials such as paper, various types of vinyl, stickers, cardboard, reflective foil, etc . Whether you are cutting intricate details or working with different materials, this cutting blade provides the precision you need.

If you want to cut heavier and sturdier materials such as leather and thicker cardboard, we recommend the iCraft™ Deep Point blade set.

Please note:

• These blades are not compatible with the LOKLiK Crafter cutting machine.
• These iCraft fine point blades use a different blade holder than the deep point blades.

You can cut the following with this blade:

• Heat transfer vinyl
• Adhesive vinyl
• Cardboard
• etc.

to install a new cutting blade in your LOKLiK iCraft™:

1. Switch off the machine: Make sure the cutter is completely switched off before you start changing the blade.
2. Remove the old blade: Carefully unscrew the blade holder and remove the old blade.
3. Insert new cutting blade: Remove a new fine blade from the packaging and place it in the blade holder with the sharp side facing down.
4. Secure the blade holder: Screw the blade holder tight again to secure the new blade.
5. Test the saw blade: Switch on the machine and perform a test cut on a piece of waste to ensure that the saw blade is correctly installed and works as expected.

Care and maintenance

Store unused blades in a dry and safe place to prevent rust and damage. Regular cleaning of the cutting blade and holder can extend the life of the blade.